My top 10 tips for using flash - Page 3
PhotoCamel: Your friendly photo community, with free discussion forums, digital photography reviews, photo sharing, galleries, downloads, blogs, photography contests, and prizes.
 

Go Back   PhotoCamel - Your Friendly Photography Forum > Tools Of the Trade > Tutorials

Reply
 
LinkBack Thread Tools Display Modes
Old 03-19-2013   #21
Guanaco
 
Location: White Stone S.C.
Posts: 295
CamelKarma: 1094
Editing OK?: Ask First
Constructive Critique?: Yes
Default Re: My top 10 tips for using flash

Quote:
Originally Posted by ciaran View Post
Don't use flash?
Why??Mack
Big Mack is offline   Reply With Quote
Old 03-19-2013   #22
F1 Camel
 
ksgal's Avatar
 
Location: Ks
Posts: 3,897
CamelKarma: 7958959
Editing OK?: Yes
Constructive Critique?: Yes
Default Re: My top 10 tips for using flash

Quote:
Originally Posted by Randy Lawson View Post
Is there any tips out there wildlife photographers use? Due to the nature of the subject many of these tips do not a apply.
Infra red trail camera??

I'm sure the bird folks have their own list.
__________________
I'm Cherie.
ksgal is offline   Reply With Quote
Old 04-19-2013   #23
Guanaco
 
Posts: 261
CamelKarma: 2900
Editing OK?: Yes
Constructive Critique?: Yes
Default Re: My top 10 tips for using flash

Great tips,thanks for sharing!
Gerald is offline   Reply With Quote
Old 05-03-2013   #24
Alpaca
 
Posts: 3
CamelKarma: 10
Editing OK?: Ask First
Constructive Critique?: Yes
Default Re: My top 10 tips for using flash

Thanks for sharing such a useful basic tips
saching is offline   Reply With Quote
Old 05-06-2013   #25
Guanaco
 
Posts: 261
CamelKarma: 2900
Editing OK?: Yes
Constructive Critique?: Yes
Default Re: My top 10 tips for using flash

Thanks Ciaran for your flash tips!
Gerald is offline   Reply With Quote
Old 05-16-2013   #26
Alpaca
 
Posts: 23
CamelKarma: 4958
Editing OK?: Ask First
Constructive Critique?: Yes
Default Re: My top 10 tips for using flash

Very nice thanks for sharing
rxitrxit is offline   Reply With Quote
Old 05-17-2013   #27
Vicuna
 
Posts: 82
CamelKarma: 78076
Editing OK?: Ask First
Constructive Critique?: Yes
Default Re: My top 10 tips for using flash

Thanks! I found these tips really useful. Reason why I love forums...good stuff
thinkingtree is offline   Reply With Quote
Old 05-20-2013   #28
Guanaco
 
Posts: 261
CamelKarma: 2900
Editing OK?: Yes
Constructive Critique?: Yes
Default Re: My top 10 tips for using flash

Great information to know, thanks for sharing!
Gerald is offline   Reply With Quote
Old 06-03-2013   #29
Alpaca
 
Posts: 21
CamelKarma: 10
Editing OK?: Ask First
Constructive Critique?: Yes
Default Re: My top 10 tips for using flash

thank you
very helpful
ipoobig is offline   Reply With Quote
Old 06-03-2013   #30
Alpaca
 
Posts: 21
CamelKarma: 869
Editing OK?: Ask First
Constructive Critique?: Yes
Default Re: My top 10 tips for using flash

My take on flash:

Flash basics

On-camera flash, (forget the built-in flash) using a hot-shoe-mounted flashgun, directed straight at the subject is very flat lighting, possibly the very worst of all. There are ways that we can modify the on-camera flash to control our lighting. We can diffuse the flash by means of clip-on plastic domes, (think non-coloured Tupperware-type pots that will fit over flash head),or we can bounce our flash from ceilings, walls, off of reflectors, etc.,.
Balancing the light between existing light and flash is quite simple- Just remember that Shutter-speed controls existing light and Aperture controls the flash effect. You set your cameras mode to Av (aperture priority) selecting aperture to desired depth of field. (ie: for weddings F8 does the job) Get a reading from subject. Take note of these settings. Now select M (manual) mode and use the settings you got from Av mode. Fit your flash to hot shoe, use manual flash. Try first maximum sync speed (usually 1/250 sec or 1/500 sec), then come down from here just adjusting shutter speed, and checking on monitor, until ambient light looks right. As for power setting, I like to start at ¼ power, then I can go down two stops to 1/8 and 1/16 power, and up to ½ and full power. (My flashguns only span from full to 1/16 power) For interior shots use the same method: If ambient light reads 1/125 @ F4, you will need to set aperture to F4, and set shutter speed at 1/500(if this is your cameras maximum sync speed, or 1/250 @ F5.6 if that is your maximum sync speed, and bounce off ceiling. Adjust power of flash until it looks right in the monitor. This gives a ratio of 3:1 as a basic starting point. A big advantage, especially when photographing people, is to have the flash off-camera, so wherever you wander to get different angles, your lighting with remain constant. If flash is on camera, you would need to make adjustments each time you move out of the pre-set range of focus. Your flash can be triggered by radio transceivers (Pocket-wizards) or by means of pc cables. For wraparound, or cross- lighting, you could place your subject between the sun and your off -camera flash, using the sun as fill and your flash as the main, or key, light
Ideally, indoor images should not show that flash was used, so for this to take place, modification is required. I use a black computer mouse-mat, which forms a half snoot and is rubber banded to the underside of my flashgun when bouncing off of ceilings etc., this ensures no direct light lands on the subject. You can choose of course, to use automatic mode for flash-or TTL, (Through The Lens) I just prefer the manual mode.

Problems occur when using flash under fluorescent illumination, where you will get a severe green cast over your images-Solution is to use a gel (Window green) over the flash window, and a magenta filter( FL-D) over the lens. These filters will lose you one stop of light, but the lens filter alone will do the trick, if you aren’t using flash. Why this works is green over the flash window equalizes foreground and background color temperature, and the magenta on the lens absorbs the green from both sources to neutralize the image.
Most cameras will let you select front or rear curtain flash set-ups, (Front curtain flash fires as soon as the shutter opens, while Rear (or second) curtain flash fires just before shutter closes) and for most types of photography Front curtain will do the job, If the subject is on the move however, Rear, (Second) curtain flash is the way to go, the reason being that if you were to use front curtain flash on a moving subject, the movement defining blur, especially against a black, or at least a dark background, would appear in front, and not behind the subject, giving the impression that the subject is going backwards. On the other hand, if you were to use rear-(second) curtain flash for say a portrait, and you are trying to capture a certain mannerism, you would not want the flash to fire too late and miss the emotion.

If you shoot at a party or wedding reception, indoors at night using the auto or programme flash setting, which is usually either 1/250 or 1/500 second, you will end up with ultra black backgrounds, and not the scene you saw. That is because the flash fired too fast to record background detail. Solution: set camera to shutter priority or manual mode, and adjust speed to between 1/30 and 1/8 second-these are normal settings for fairly dark conditions, because of the actual flash speed,. blur won’t be a problem. This is Known as “Dragging the shutter”.
When using Dragging method keep flash set to auto or ttl, as, unless you are comfortable with doing this , you could complicate matters. If you only have a point and shoot camera, use the night setting-the camera will automatically set shutter speed to allow background detail to be captured, BUT, you will need a tripod/monopod etc, as for night mode shutter speeds are likely to be a lot slower than 1/8second.

Flash doesn’t reach as far as you like? Up the ISO! -“Twice the distance, four times the speed”. For instance: If your flash has a Guide number (GN) of 25(metres (80 ft), the best you can expect is a realistic distance reach of 20 metres (60 feet) at Iso 100,so at Iso 400 you will get a realistic reach of 120 feet (40 metres),and at 1600 Iso, a reach of 240 feet (theoretically),but noise will play its part at high Iso’s.



If you are using an automatic flashgun, that does not give you fill-in values, Meter the scene, select an f-stop for the DOF you want, set auto flashgun ISO to double camera ISO and take your shot, this will give a 2:1 ratio-your fill will be 1 stop darker that the main subject. If you double the ISO again, fill will be two stops darker.


__________________
Members don't see ads in threads. Register for your free account today and become a member of PhotoCamel to open up the site's many benefits and features.
kenny123 is offline   Reply With Quote
Reply

« PhotoCamel - Your Friendly Photography Forum > Tools Of the Trade > Tutorials »


Share this topic:

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Top 10 Signs you are addicted to Photography Mary Robinson Photography Talk 11 11-18-2010 10:43 AM
My Formula Drift Top 10..... AtlPikMan Sports & Action 12 06-04-2009 01:11 AM
Top 10 Scariest New Car Features aam1234 OT: Off-topic 0 10-10-2008 03:39 PM
Top 10 cameras on Flickr Rokcet Scientist Photography Talk 9 09-13-2006 03:40 PM