PhotoCamel - Your Friendly Photography Forum

PhotoCamel - Your Friendly Photography Forum (https://photocamel.com/forum/)
-   Camera Accessories (https://photocamel.com/forum/camera-accessories/)
-   -   What do I need to look for in a good Monopod? (https://photocamel.com/forum/camera-accessories/200890-what-do-i-need-look-good-monopod.html)

Intothedeepblue 05-14-2014 11:54 AM

What do I need to look for in a good Monopod?
 
Have a great Carbon Gitzo tripod and Arca Z1 Ball head, I appreciate well made stuff, never used or had a monopod before and seeing I will need to rely on one leg the dynamic may be a bit different with a monopod.

So what constitutes a well made functional Monopod?
I'll typically be using shorter lenses 24-70 and max 70-200mm 2.8 with 1.4xTC

wdesigndeb 05-15-2014 06:56 AM

Re: What do I need to look for in a good Monopod?
 
I use an Induro carbon monopod model CM25. I'm using it with a 100mm and 450d. If your camera/lens combo is heavier you could always bump up to the next model, though this monopod is rated at 22lbs so it's probably not necessary

It has 5 sections each separated by a twist lock mechanism. The twist locks make it very easy to adjust the length quickly. This monopod is rock solid. I use one of their ball heads...not as good as a Manfrotto, but it serves the purpose.

The monopod comes with a belt holster, though I just use a simple piece of nylon cord tied to the top and bottom to make a shoulder strap. This monopod would be absolutely perfect if Induro made the foot changeable....sadly you can't change it out for a spiked foot or wide foot for working on sand.

As far as technique goes, this link The Camera Monopod | How To Articles – In The Same Boat: Paddling.net shows you the technique that I use (#3)...the tip of the monopod up against the instep of the foot.

Charlie_S 05-16-2014 07:56 AM

Re: What do I need to look for in a good Monopod?
 
Choosing a monopod, is much like picking a tripod. What do you see not only for camera/lens weight but also use and conditions when used. Use in extreme conditions every day require more heavy duty, same as the tripod choice for those conditions would be. You want heavy duty enough to be sturdy for the weight supported, but light enough you dont actually use it. A good rule of thumb is pick a weight rating of at least 50% higher than the actual total weight of your camera/lens combination.
My most used is an older Bogen 3249 aluminum 4 section. heavy enough its sturdy, not weight prohibitive, i can use it for a walking stick if needed, self defense in case of a theft attempt, and of course its intended purpose, it easily supports a D700 body with either the 70-200, or 80-400.
I don't see the need for a ball head. a simple swivel head on a mono is sufficient IMHO.

simv 05-16-2014 08:28 AM

Re: What do I need to look for in a good Monopod?
 
Please do consider gorillapod too. I'd recommend -
JOBY gorillapod
Model name - Focus.

I recently brought it and m very happy with it.

Narsuitus 05-16-2014 01:18 PM

Re: What do I need to look for in a good Monopod?
 
1 Attachment(s)
Quote:

Originally Posted by Intothedeepblue (Post 2064929)
So what constitutes a well made functional Monopod?

Here are the factors I considered when I needed a monopod:

Weight (heavy vs. light)

Material (aluminum vs. carbon fiber)

Rigidity (does not bend)

Durability

Intended use
·for light-weight compact cameras
·for heavy-weight cameras

Tubular leg design vs. Channel leg design

Leg locks
·twist locks
·clamping lever locks (my personal preference)
·wing nuts

Number of leg sections (no more than three)

Height (at least 5 1/2 feet for my height)

Compactness (collapses to smaller size)

Head
·Fixed (I avoided monopods with a fixed head)
·removable
·none

Feet
·fixed non-slip rubber
·fixed spike feet
·retractable spike feet
·suction cups
·snow feet

Screw
·3/8 inch (European Standard)
·¼ inch (American Standard)

Quick Release Feature

Reputation of Manufacturer (I avoided manufacturers with no history of producing high quality tripods)

Maximum load (want 2x weight of my heaviest camera)

Price


I ended up buying two monopods – one for my heavy cameras and one for my lightweight compact cameras.

My heaviest lens/camera combination weighs about 10 pounds (500mm f/4 telephoto lens mounted on a Nikon F2 with action finder, motor drive, and battery pack). The Manfrotto 681, with a maximum load rating of 26 pounds, and an attached Wimberley Arca-Swiss quick release clamp is what I bought to meet my needs.

For my compact cameras, I selected an inexpensive two-section 7-pound maximum load monopod with an attached quick release tilt head.

https://www.flickr.com/photos/11336821@N00/14013177028/

gryphonslair99 05-16-2014 07:05 PM

Re: What do I need to look for in a good Monopod?
 
One good monopod that supports you heaviest gear combination will work for lighter gear. A good carbon fiber monopod with an arca-swiss QR on top and an L bracket on your body and you are set to go. If have or get a lens with a tripod ring, an arca-swiss foot to attach the lens to the monopod is quite handy.

gryphonslair99 05-16-2014 07:07 PM

Re: What do I need to look for in a good Monopod?
 
Quote:

Originally Posted by simv (Post 2065441)
Please do consider gorillapod too. I'd recommend -
JOBY gorillapod
Model name - Focus.

I recently brought it and m very happy with it.

Why?


All times are GMT -5. The time now is 04:13 PM.