S1 Pro, confused about ISO...

[spystyle]

Hello from Maine,

I am a new photographer and purchased the FinePix S1 Pro, this was because of the low cost ($170 for body only) and my previous excellent experience with a FinePix "point and shoot" that took incredibly sharp pics (FinePix 1400z).

Now I have a new Kodak point and shoot sub compact (V803b) for the role of pocket camera and the S1 for serious business.

But I get better pics, generally, with my $100 sub compact than my big camera!

The problem, in my best speculation, is that the S1 is 8 years old. In "computer years" that's several generations (I am a computer tech and see it daily) - the new little camera does all kinds of calculations and post processing on the fly that the S1 does not do.

One example - when I shoot with the S1, indoors, I see a yellow cast caused by the light bulbs. But when I use my new pocket camera the yellow cast is not present, I speculate this is a feature of the new camera to remove that in it's own post processing.

Now I am trying to learn to use my S1 and reading a metric ton about this and about that and I realize one difference between the S1 and my pocket camera is "auto ISO". The S1 does not have "auto ISO" but my pocket camera does. Then I looked at other DSLR cameras, like the Nikon N40, and I see they have "auto ISO". Apparently the S1 is simply too old to have this feature.

So I have been reading and trying to understand what I should set my S1's ISO at but don't know... I find it confusing. Reading the S1's manual doesn't help much either, it seems to give a very brief explanation of things.

Can anyone recommend some material I should read to take full advantage of the S1? Or should I just sell the S1 body and buy an N40 instead?

Also, is there a firmware update for the S1? I couldn't find one.

Lastly, what do you guys set your ISO on?

Thanks,
Craig

p.s. I have all Nikon AF lenses (so my troubles aren't caused by cheap lenses)

[badpickev]

i shoot a lot at 100-400 iso. the yellow cast is a white balance issue.

there is not auto iso on the S1. try using this, check out the WB settings, you might have to use a custom. on the S2 and 3 the auto WB works pretty well.
Steves Digicams - Fujifilm S1 Pro - User Review

[spystyle]

Thanks