Another guitar finish attempt...
Posted 02-11-2009 at 06:22 AM by Paul Shields
Tags finish, guitar, telecaster, tokai
This is an attempt at getting a sort of butterscotch effect on my lovely old Tokai tele. The body was originally a bit battered, so I stripped it using a mouse sander and smoothed out any wrinkles. From my understanding, this model was built using Alder, so the grain is not that obvious. It still shows through nicely enough though.
I used a white tint and then a yellow tint (nitro based). Found it quite tricky to get an even coverage, but all in all it looks quite nice. Maybe a bit lighter than I expected, but it should darken a bit over time?

White wash

First tint


The headstock - note the 'cheeky' attempt at the Fender font. Shortly after this guitar was released Tokai were forced to change it after some legal threats from Fender.



I used a white tint and then a yellow tint (nitro based). Found it quite tricky to get an even coverage, but all in all it looks quite nice. Maybe a bit lighter than I expected, but it should darken a bit over time?

White wash

First tint


The headstock - note the 'cheeky' attempt at the Fender font. Shortly after this guitar was released Tokai were forced to change it after some legal threats from Fender.



Total Comments 4
Comments
-
Posted 02-13-2009 at 09:34 AM by JDArt
-
Posted 02-13-2009 at 09:38 AM by Paul Shields
-
Posted 02-13-2009 at 07:39 PM by JDArt
-
Posted 02-24-2009 at 02:57 PM by Paul Shields
-
Posted 07-02-2011 at 04:03 PM by julie patricia lott
Total Trackbacks 0














.


