PhotoCamel - Your Friendly Photo Forum - View Single Post - Printing from LR2 shouldn't be this difficult

Eero Makela · 04-07-2009

Don't forget that you need to calibrate the monitor to lower brightness then the spyder recommends.

As per Eric Chan

"Even if your calibration software recommends setting the target luminance to a higher value (e.g., 120 cd/m2), I still suggest using a lower value such as 100 cd/m2."

Epson 3800 Step-By-Step Printing Workflow

04-07-2009	#4 (permalink)
Eero Makela Dromedary Posts: 1,575 CamelKarma: 711 Editing OK?: Ask first Gallery \| Blog	Re: Printing from LR2 shouldn't be this difficult Don't forget that you need to calibrate the monitor to lower brightness then the spyder recommends. As per Eric Chan "Even if your calibration software recommends setting the target luminance to a higher value (e.g., 120 cd/m2), I still suggest using a lower value such as 100 cd/m2." Epson 3800 Step-By-Step Printing Workflow
	__________________ Eero Makela Photographies des femmes pour les hommes. ========== To see the light you have to understand the light, but to understand the light you have to see the light.