[carl86]

My R1800 head is stuck and will not release even with the power off.
Both red lights are blinking.
I was starting to print and the first print some color was missing
I refilled the inks, I use a CIS system , I ran a head cleaning and nozzle check
and that the cyan was not printing I wated about 10 min. and tried again
and thats when the head stuck and the lights started flashing.
The machine has not seen a lot of use, I am a hobbyist and I print
for my own use. about 350 8.5x11 and 10 13x19s in 2 1/2 years.
I would sure like some help or advise

thank you
carl